|
Our
Products Rage |
|
>>Flip of Caps Assembly
Machine |
| |
Multi Spindle punchring (Assembling) machine for Flip off cap designed for high speed
production.
Alluminium and plastic Cap's feeder device feed the both caps into the machine. First station assemble both cap and 2nd station's heated punches riveted the plastic caps knobe properly.
All moveble part are made by tested bearing steel.
Heater are even specially designed for this machine.
The production of 18 head machine is 1.50 Lac caps in 8 Hours. |
 |
Flip of Caps Assembly
Machines |
|
>>Multi Spindle
Kaurling Machine |
|
|
Kunrling,
beading of with automatic feeder device
(i) T.R.M 8 (Model) suitablefor 25x17, or 8x18mm or
31.5x18mm
Production capacity 480caps/minute
(ii) T.R.M 5 (Model)
Suitable for 22x15mm or
25x17, or 28x18mm or 31.5x18mm Production Capacity
350caps/minute
(iii) T.R.M1 : attached
with Automatic feeder device
Single head machine
suitable for all size caps. Only tool be change as per
cap.
Production capacity 100caps/minute. |
 |
Multi Spindle
Kaurling Machines
|
|
>>Wadding Machine |
|
|
WAD (Liner)
Assembly machien with Auotmatic Feeder device
(i) W-24 (Model)
Suitable for 25x17mm, or 18x18mm,
or 31.5x18mm
Production capacity 480
caps/minute
(ii) W-18 (Model) Rottery
type
Suitable for above written
sizes
Production capacity 360
caps/minute |
 |
Wadding Machines |
|
>>Dies |
|
|
|
Dies
: for
Pilfer-Proof Caps, Aluminium Seal, Screw Caps, Cap
Liner, Pull of Cap, Roll-on caps. Lug Caps, Shoe
Polish & all type of Metallic Caps etc.
Single
Cavity to 5 Cavity :
All the die parts are made from special quality die steel
properly hardened and ground finished for longer life.
Pillar set is made from good quality E.N. Steel duly
stressed reserved and hand scrapped. The die is designed to
cut, draw and trimming in one operation.
|
 |
Dies |
|
>>Pneumatic Power Press |
|
|
|
Punching press with automatic sheet feeder
device
(i) for five cavity die set
Suitable for 22x12 mm or 25x17 mm or 28x18mm.
(note) Production capacity 480caps/minute
(ii) for four cavity die set
Suitable for 28x18mm or 31.5x18mm or 28x22mm production
capacity 380caps/minute.
(iii) for three cavity die set
Suitable for 2x17mm or 28x18mm or 31.5x18mm or 28x22mm or
31.5x24mm or 38x16mm or 29.5x35mm Ist operation
Prodution capacity 290 caps/minutes
(iv) for Two Cavity die
Suitable for extra die cap 2nd & 3red operation
30x35mm or 30x44mm or 31.5x44mm, or 3060mm or 31.50x60mm |
 |
Pneumatic Power Press |
|
>>Single Spindle
Knurling
Machine with Feeder Device |
|
|
The body will be made from cast iron, casting precision
machine and body stand will be fabricated and good
quality mild steel. Ejector shaft and main shafts
aligned on taper roller bearing, lower tool spindle are
accurately aligned on needle roller bearing and thrust
bearing, spindle bore ground for taper shank of Ejector
shaft move on liner motion bearing.
The designing of adjustable chute and cap feeder device is
so easy to lower tool is through accurate machine slides.
|
 |
Single Spindle
Knurling
Machine with Feeder Device |
|
>>About Us
We are proud of the
leadership position we have earned for our Company.
Our corporate office is in Delhi (India), We are manufacturing of
pilfer proof caps dies, dies, metallic caps dies,
lug caps dies, dies for screw caps, manufacturer of
assembly wad assembly wad machine, schearing
machine, ring seprator. |
|
>>Quality
We strive hard to make
quality Caps Making Machine for our customers for
this we lay highest emphasis on the quality for
decades we have been following these lines that
result in our strong network of custmoers in various
state and cities of india like, assam, vadodara,
bhubaneshwar, chandigarh, chennai, cuttack,
deharadun, goa, guwahati, indore, jammu, kolkatta,
lucknow, nagpur, patna, trivandrum, vadodara, pune,
navi mumbai, ghazibad, vellore, thane, banglore,
karnataka, aligarh, hyderabad, pune, ahmedabad,
jaipur faridabad, himachal pradesh, uttarakhand.
gujrat, bihar, manipur, rajasthan, arunachal
pradesh, chattisgarh, zarkhand, sikkim, madya
pradesh |
|
>>Vision
Given word business
scenerio and india's growing economical
identification we are aiming to establish business
association in country like Bangladesh, Bhutan,
Cyprus, Georgia, Indonesia, Iran, Jordan, Kuwait,
Laos, Lebanon, Malaysia, Maldives, Mongolia,
Myanmar, Nepal, Oman, Qatar, Russia, Saudi Arabia,
Singapore, South Korea, Sri Lanka, Syria, Taiwan,
Tajikistan, Thailand, Tibet, Turkey, Turkmenistan,
Uzbekistan, Vietnam, Yemen, Armenia, Azerbaijan,
Bahrain, Japan, Kazakhstan, North Korea. |
|
>>Thanks
We strongly feel that
it is faith of our customers in us an our products
that broght us to this hight hence we are thank full
to our customers in india and other parts of world |
|
::
Contact Us :: |
|
Company Name
|
: |
SMT |
|
Contact Person
|
: |
Ram
Nayan |
|
Address |
: |
P-2, Gali No. 10, Industrial Estate,
Anand
Parbat, New Delhi - 110005 (INDIA) |
|
Phone |
: |
91-011-25756025 |
|
TeleFax |
: |
91- 011-25866015 |
|
|
|
|
|
E-mail |
: |
sales@b4delhi.com |
|
|
|
